|
A Few Examples of my Work
Below are the services I offer. If you have
other work let me know and if I don't feel it is something within my expertise,
I will recommend a gunsmith that can help you out.
Check out Cowboy
Shooters Supply. The Brisco Kid does good work!
* prices subject to changes in parts prices
Single Action Revolvers
|
Item
|
Description
|
Price
|
| SA1 |
Install lighter weight springs in Rugers
(includes parts) |
$30 |
|
SA2
|
Shortening Barrels (Includes reinstalling
sight blade; includes touch up cold blue only. Add $20 for
shortening ejector and housing if needed) |
$80 |
|
SA3
|
Installing 1/8" wide front sight, ball
mill top strap and widen rear notch (makes for faster target acquisition) |
$80 |
|
SA4
|
Both #2 & #3 above |
$130 |
|
SA5
|
Cut 40 line per inch serrations on front
sight blade for easier sight acquisition (less glare). |
$25 |
|
SA6
|
Polish and chamfer cylinder chambers
(for faster reloads) |
$35 |
|
SA7
|
Convert your Large frame Ruger SA
to free spin cylinder using Power Custom free spin pawl.
Note:
Brisco Kid (Cowboy Shooters Supply) has a very good fix of his own
for this that uses the original pawl. Contact
him for details. |
$60 |
|
SA8
|
Installing Power Custom safety notch hammers
on Rugers (includes parts) |
$190 |
|
SA9
|
Can also turn new barrels from Shilen
Blanks Call for prices. |
Call |
|
SA10
|
Custom over cocking stop for Large Frame
Ruger Vaquero and Blackhawks (Saves wear and tear) click
here for more info on this item |
$50 |
Marlin 1894 Rifles
|
Item
|
Description
|
Price
|
|
MR1
|
Action Job (polish internal parts. New
Marlins are often very "crunchy") |
$75 |
|
MR2
|
Install one-piece firing pin and lighter
hammer spring (Labor only. Subject to availability of parts)
(these two things usually makes a marked
improvement) |
$30 |
|
MR3
|
Fix the "Marlin Jam." -- (when two rounds
try to enter the carrier at once) This is due to a sharp edge on the lever
that cuts a groove into the carrier. I build up and round off the sharp
edge on the lever so it won't cut so easily and weld in the groove
and polish it off. |
$50 |
Stoeger (and similar models) Double
Barrel Shotguns
These Stoeger guns are notorious
for being nearly unsuable out of the box. The triggers are very heavy,
the latch spring is so stiff that a lot of the ladies can hardly open it.
But they are not that expensive and, with a little tuning and polishing,
they make a pretty good cowboy gun.
|
Item
|
Description
|
Price
|
|
DB1
|
Modify safety so it won't reset when gun
in opened |
$20 |
|
DB2
|
Chamfer barrels for quick reloading |
$30 |
|
DB3
|
Polish Chambers for easier ejection of
fired shells |
$20 |
|
DB4
|
Install lighter latch spring and tune
latch |
$30 |
|
DB5
|
Trigger job (lighter trigger springs and
remove some of the "creep." (Don't ever put lighter hammer springs in a
Stoeger. They need all the "zip" they can get to consistently set off
your primers) |
$75 |
|
DB6
|
Full Action Job: (includes all the above
and other misc polishing for smoother operation.) |
$140 |
For questions about other basic work contact
me (Kingdom Kid)
Kingdom Kid
kingdomkid@leadbucket.com
(AKA Brad Sherman) |
